荧光光度法测定蔬果类罐头食品中的微量铅

以3mol/L HCl为介质,利用荧光光度计检测PbCl2-4的荧光强度,建立了测定蔬果类罐头食品中微量铅的新方法,该方法的检出限为8.8μg/mL,回收率为;97.0%.     

Adhesive-free bonding of Zerodur glass to silicon

This work demonstrates anodic bonding of Zerodur glass having very low co-efficient of thermal expansion (CTE) to Si, Zerodur glass to thermally grown silicon dioxide on silicon and Pyrex glass to Ge. Bonding results, using point cathode contact and plate cathode contact configurations, are discussed. Bonding parameters, i.e. applied dc voltage, temperature and bonding time were determined. Heating and cooling rates for crack-free bonding of Zerodur glass were also determined.     

Composition spread metal thin film fabrication technique based on ion beam sputter deposition

A composition spread metal thin film fabrication technique based on ion beam sputter deposition method was developed. The technique enables us to fabricate any desired part or a complete binary/ternary composition spread metal thin films onto a single substrate by sequentially sputtering different target materials. Composition spread metal thin films can be deposited directly on a dielectric film in patterned electrode shape for C-V and I-V measurements. The system could be especially useful in the search for new multi-component metal gate materials.     

Schottky metal library for ZNO-based UV photodiode fabricated by the combinatorial ion beam-assisted deposition

A binary alloy Schottky barrier diode on zinc oxide (ZnO) was developed using the combinatorial ion beam-assisted deposition system. The compositional fraction of the binary alloy was continuously varied using the composition-spread technique, to control the Schottky barrier height. After metal deposition, patterned Schottky diodes were fabricated on a ZnO single-crystal substrate. Pt-Ru alloy was selected from the work function viewpoint. Our experiments showed that the compositional fraction of the Schottky binary alloys changed continuously as designed and the Schottky barrier heights measured by current-voltage (I-V) measurements increased with increasing Pt content. Maximum barrier height difference for ZnO was 137 meV. Using ion beam deposition in parallel with the combinatorial system showed that the Schottky barrier heights for ZnO can be controlled by binary metal alloying.     

线性方程组通解并行数值方法

1预备知识 线性方程组消息传递MIMD算法是20世纪90年代至今的活跃课题，但尚无此问题 的通用有效算法发表.用!.}.}表示矩阵列分块划分，记AX=b为[AI司.定理1、2是文 {l]、[s]成果综述和推广. 定理i[‘]设有线性方程组!e}己l，e〔尺”“m，d〔R”“‘，rank(e)=r.当且仅当rank(!     

Preparation of activated carbons from cherry stones by activation with potassium hydroxide

Using cherry stones, the preparation of activated carbon has been undertaken in the present study by chemical activation with potassium hydroxide. A series of KOH-activated products was prepared by varying the carbonisation temperature in the 400-900 °C range. Such products were characterised texturally by gas adsorption (N₂, −196 °C), mercury porosimetry, and helium and mercury density measurements. FT-IR spectroscopy was also applied. The carbons prepared as a rule are microporous and macroporous solids. The degree of development of surface area and porosity increases with increasing carbonisation temperature. For the carbon heated at 900 °C the specific surface area (BET) is 1624 m² g⁻¹, the micropore volume is 0.67 cm³ g⁻¹, the mesopore volume is 0.28 cm³ g⁻¹, and the macropore volume is 1.84 cm³ g⁻¹.     

Transition of 3D to 2D growth modes of InAs grown on GaAs

We report a method to grow thin strain-released InAs layer on GaAs (1 0 0) substrates by molecular beam epitaxy. We have shown that by controlling the growth parameters, a thin 2D InAs layer can be grown during initial stages, which eventually serves as a buffer layer to trap dislocations and epitaxial regrowth of InAs on this buffer results in high crystal quality. The size dependence of the InAs islands formed during initial stages with growth time has been studied by atomic force microscopy. With continuous short-time epitaxial growth during various stages, the InAs growth mode transfers from 3D to 2D. The introduction of dislocations into InAs epitaxial islands and their behavior during initial growth stage has been theoretically studied. The theoretical results are in remarkable agreement with the experimental results and shows that once the film is formed, the film strain is totally relaxed. The 200 nm thick InAs epilayer grown on this buffer shows a narrow X-ray diffraction peak. Such InAs strain-released buffer layer would be useful for regrowth of high In content based materials on top of it for electronics and optoelectronics device applications.     

Influence of chemical composition of filler's surface on the burning of foam plastics

The influence of additives such as TiO₂, Al₂O₃ and their mechanical mixture as well as aluminium oxide, the surface of which contains phosphorous and titanium-oxide nanostructures, on the combustibility of foam plast (trade mark PEN-I), produced on the basis of epoxide novolak block-copolymers, was studied. It was stated that the incorporation both phosphorous-containing and titanium-containing oxides in the composition results in significant (in two to five times) decreasing of the samples’ combustibility. The probable mechanism of inhibition of burning process for those combustion retarders was discussed.     

对称正交反对称矩阵反问题解存在的条件

矩阵反问题和矩阵特征值反问题在科学和工程技术中具有广泛的应用,有关它们的研究已取得了许多进展[1,2].[3]和[4]分别研究了反对称矩阵反问题和双反对称矩阵特征值反问题等.本文研究一类更广泛的对称正交反对称矩阵反问题.用Rn×m（Cn×m）表示n×m实（复）矩阵的全体,ASRn×n表示n阶反对称矩阵的全体,ABSRn×n表示n阶双反对称矩阵的全体,ORn×n表示n阶正交矩阵的全体.A+表示矩阵A的Moore-Penrose广义逆.In表示n阶单位矩阵.ei表示n阶单位矩阵的第i列,Sn=[en,en-1,     

Controlled structure and density of “living” polystyrene brushes on flat silica surfaces

Thin layers of polystyrene were grown from surface-grafted nitroxide initiators via controlled “living” free radical polymerization. The “reactive” Langmuir-Blodgett deposition method allowed an effective control of the initiator layer density leading to PS brushes with different and high grafting density and stretching. The influence of the grafting density on the layer structure was studied. Comparison with theoretical predictions for monodispersed brushes in bad solvent was discussed. The thickness was found to vary linearly with molecular weight and the density dependence was shown using wetting measurements. Special features of controlled radical nitroxide polymerization from a surface were discussed. A direct comparison of the molecular weight and polydispersity between surface and bulk polymers was made by de-grafting the brushes into a toluene/HF solution. Finally, some evidence of a “surface Fischer” effect was shown from re-initiated layers. Received 20 December 2001